Mitsubishi Lancer Evo IV – V – VI – X


This version of YouWeel is specifically designed to be installed on Mitsubishi Lancer EVO X.

It’s mandatory to enjoy the full potential of this funny car.

It improves the whole feeling of the car, and the driving pleasure, most if you are a tall driver, but less big persons report huge improvement too.

It’s a unique solution for cars without the depth adjusting of the steering wheel, which are normally uncomfortable to drive for tall persons.

This is the perfect solution if you want the OEM steering wheel closer to you without using any non-airbag aftermarket steering wheel.

Very simple fitting, and reversible: it can be unfitted from the car if you wish, and everything will return full stock.

The same spacer fits both manual and automatic cars. No difference in both product and installation procedure.

The OEM wires inside the steering wheel are long enough to be reconnected without being under any stress, during the installation procedure they can be re-routed inside the steering wheel’s slots to gain the required extra lenght.

Track day lovers report improved feeling on the brake pedal because installing the spacer make possible to move the seat backwards and gain room for the legs, without hitting the lower steering column.

It fits many other Mitsubishi, all Lancer (not only the EVO X version, even smaller engines), and older EVO 5 and EVO 6 versions.

Due to similar design of the internals of the steering wheel, it’s straight fit on the following cars too:

Galant EAxx
Legnum ECxx
GTO/3000GT Z15A Z16A
Colt Zxxx
Eclipse D32A

It does NOT fit the LANCER EVO 7 8 9, because it’s MOMO steering wheel has different way of mounting on the steering column, we are developing a version which will put for sale soon.


1 in stock (can be backordered)

Additional information

Weight 1 kg
Dimensions 16 × 16 × 10 cm

6 cm – 2,4"


The spacer replicates the same OEM fitment of the steering wheel on the column



Kit set

Bolts, central nut, Washers, Youweel


DDM – Daily Driver Motorsport


Billet aluminum and steel CNC machined


CNC machined, both on male/female hub, 100% matching with OEM steering column and wheel

Wire Extension

Not Required


Matt black